Wireless cameras and receiver and dvr card 2years warranty p
PROTECT YOUR HOME OR BUSINESS
WIRELESS CAMERAS &receiver; &dvr; card 2years warranty
2.4G locked frequency transmitter and receiver. The open transmission distance can be up to 100 meters. The receiver can also be used by infrared remote control and can plug into monitors with AV IN so you can view what is happening, and record it if the product has recording capability. Night vision distance of the infrared camera is up to 15M.
A DVR CARD IS INCLUDED IN THE PACKAGE TO VIEW YOUR FOOTAGE REMOTELY ON YOUR PC..........
This set comes with 1 reciever and 4 cameras.
Dimension: 120x99x30mm
Receiver Specifications
Receiving Frequency: ISM 2400~2483Mhz
Intermediate Frequency: 480Mhz
Frequency Stabilization: +/-100Khz
Demodulation Mode: FM
Antenna: 50ohm SMA
Receiving Sensitivity: -85dBm
Video Output: 1Vp-p@75, S/N 38dB
Audio Output: 1Vp-P@600
Power Adapter: DC 12V/500mA
Dimension: 120x99x30mm (LxWxD)
Manual or Remote Controlled
Four Channels Available
Channel Scan and Channel Skip for multiple Cameras
Camera Specifications
Image Device: 1/3 Inch OmniVision CMOS
TV system: PAL 628(H)x568(V) NTSC 510(H)x496(V)
Horizontal Definition: 380TV Line
Angular Field of View: 45deg(f=6mm)
Minimum Illumination: 0Lux
Built in 30 IR LED for 15m night vision range
Synchronization System: Internal
Scanning Freq(H): 15.625KHz PAL / 15.734KHz NTSC
Scanning Freq(V): 50Hz PAL / 60Hz NTSC
Backlight Compensation: Auto
Electronic Shutter: 1/50(1/60)~1/100,000sec
White Balance: Auto
S/N Ratio: 48dB
Gamma Correction: 0.45
Operation Temperature: -10~50 deg C
Transmission Frequency: ISM 2,400~2483MHz
Locked Frequencies
Power Adapter: DC12V/500mA
Dimension: 44x100 camera circumference x L
Waterproof
Built in Microphone
Recommended Range for Objects: 1-15M. Max effective range 15M.
Transmission Range: 100m without interference
Wireless transmission and reception (Range approx. 50 metres)
· Send and Receive pictures through walls with high resolution
· Small and Light Weight
· Lower Power Consumption
· High Sensitivity
· Easy 1-Minute Installation
· Easy to Operate
OPERATING INSTRUCTIONS
1. Connect the receiver to the monitor (TV, Video, PC) with the AV cable
2. Plug the DC 12V 1000MA adaptor into the power jack of the receiver
3. Insert the other 4 DC 12V 1000MA adaptors into the power jack of each camera
4. Select the AV Channel on your TV (e.g. same channel as for your camcorder)
5. Adjust receiver antenna for better reception www.secusat.co.uk
Wireless cameras and receiver and dvr card 2years warranty protect your home business gbp120
Phone: 0151 6783729